Sintered Metal Filter

Stainless Steel sintered powder filter cartridges are recommended for the filtration of air or liquid at higher operating temperatures & corrosive environment. Sintered S.S. cartridges are produced by cold isotactic pressing, which gives high porosity to the material and also stability. They can easily be cleaned or back washed thus having longer shelf life. Sintered filters are able to withstand high differential pressure across the filters.

Features of Sintered Metal Filter:

• High mechanical strength & good integrity.
• Good corrosion and thermal resistance.
• No possibility of media migration.
• Good permeability.
• Service life can be prolonged by cleaning and regenerating process.

Specification of Sintered Metal Filter:
Micron Rating : 0.5, 1, 3, 5, 10, 25 µ
Length : 100 mm to 1000 mm or as per request
Outer Dia : 63 mm, other dia available on request
Inner Dia : 57 mm
Wall thickness : 3 mm
Max operating temp : No constraint
Sterilization Autoclave Hot water : 121^oC, 30 min, 10 times 80^oC, 30 min, 30 times
Effective surface area for sintered filter element : Approx. 1000 cm2 per standard 500 mm long cartridge

Applications of Sintered Metal Filter

• Gas & liquid filtration
• Solid catalyst recovery
• Filtration of slurry oil
• Filtration of petrochemical products
• High temperature gas filtration
• Vent applications
• Chemical reagents
• Fluidization